Showing all 10 results
-
M9-SCCT
Pressac 1 Channel CT Clamp
Magnum offers the Pressac 1 Channel CT Clamp, designed to measure and report the AC current flowing in a single channel. Powered from the measure conductor, the measured current in the channel is reported every 30 seconds using the industry standard, wireless EnOcean protocol.
-
M9-3CCT
Pressac Wireless 3 Channel CT Clamp
Magnum offers the Pressac Wireless 3 Channel CT Clamp, designed to measure and report the AC current flowing in 3 separate channel’s. Powered from any of the measured connectors, the measured current in all 3 channels is reported every 30 seconds.
-
Mx-USR-RPT
Smart Repeater
Wireless Repeater which receives telegrams and re-sends them to enhance and increase the signal distance from the transmitter to the receiver. Typically a repeater will be used when the sensor has been mounted too far from the receiver or there are obstacles between the sensor and receiver which diminishes the signal.
-
Mx-EDWS
Window / Door Sensor
The Magnum Door / Window Sensor helps provide energy savings for an area by detecting when a door or window opens or closes.
-
Mx-MRC1
Window / Door Sensor (MRC1)
The Magnum Door / Window Sensor helps provide energy savings for an area by detecting when a door or window opens or closes.
-
Mx-EKCS
Wireless Key Card Switch
The wireless key card switch communicates wirelessly with compatible devices in a guest room when a key card is inserted or removed from the slot to determine occupancy.
-
Mx-ML2
Wireless Motion / Lux Sensor
The Mx-ML2 is a wireless, self powered, passive infrared sensor that ensures reliable detection of occupant presence, and is ideally suited for occupancy-based lighting control.
-
Mx-EOSC (ceiling mounted)
Wireless Occupancy Sensor
The ceiling-mounted occupancy sensor saves energy and adds convenience by accurately detecting when an area is occupied or vacant.
-
Mx-EOSW (wall mounted)
Wireless Occupancy Sensor
The wall-mounted occupancy sensor saves energy and adds convenience by accurately detecting when an area is occupied or vacant.
-
Mx-RS2
Wireless Temp / rH Sensor
Solar-powered sensors, with an intelligent transmission management, are used to measure the room temperature and room rH, and transmit this information wirelessly using the non-proprietary EnOcean wireless protocol.